课程设计报告-悬臂支架铸造工艺设计说明书推荐.docVIP

xxxxxxxxxxxxxxxxxx 课程设计报告 课程设计名称： 悬臂支架铸造工艺设计 学 生 姓 名： xxxxxxxxxxxxxxx 学 院： xxxxxxxxxxxxx 专业及班级： xxxxxxxxxxxxxx 学 号： xxxxxxxx 指导教师 ： xxxxx xxxxxxxxxxxxxxx 摘要 铸造生产通常是指用熔融的合金材料制作产品的方法，将液态合金注人预先制备好的铸型中使之冷却、凝固，而获得毛坯或零件，这种制造过程称为铸造生产，简称铸造，所铸出的产品称为铸件。大多数铸件作为毛坯，需要经过机械加工后才能成为各种机器零件；有的铸件当达到使用的尺寸精度和表面粗糙度要求时，可作为成品或零件直接应用。 本课程设计是获得-500悬臂支架的合理铸造工艺设计方案，初步设计悬臂支架的铸造工艺方案包括通过Pro/e仿真，模拟结果进行分析，铸造工艺方案的合理性绘制工艺图 关键词工艺设计，悬臂支架Creo，CAD。Usually refers to using the molten alloy casting production material products, the method of the liquid alloy preparation beforehand good mold in injection cooling and solidification, and blank or parts, the manufacturing process is referred to as casting production, referred to as casting, casting out products are referred to as casting.As most of the casting blank, need after mechanical processing can be all kinds of machine parts;Some castings when to use the dimensional accuracy and surface roughness requirements, can be directly applied as finished products or parts. This course is designed to obtain reasonable ZG270-500 cantilever casting process design, preliminary design of cantilever casting process, including selection of casting pouring position and parting surface, determine the number of cores, positioning way, the core order, core head shape and size, determine the process parameters (such as machining allowance, mould level Angle, casting the rounded shrinkage rate, etc.) and the pouring system, riser and chill the shape and size and arrangement in the sand mold, etc, through the Creo simulation, according to the result of simulation is analyzed, the rationality of the casting process, then determine the processing plan in words and casting process representation in the CAD drawing, mapping the casting process. Keywords: casting process design; cantilever; Creo; CAD. 目录 第一章 零件简介 1 1.1 零件介绍 1 1.2 最大尺寸 1 1.3 铸件材料及性能 1 第二章 确定铸造工艺方案 2 2.1 造型方法与铸型种类的选择