可逆冷轧机PLC-300监控系统应用设计-应用文.docVIP

? 可逆冷轧机PLC-300监控系统应用设计 摘要 随着工业的发展，对冷轧板带生产也提出了更高的要求，进一步促进了冷轧自动控制技术的发展。只有通过高水平的自动控制系统才能够获得高质量的成品带钢，保证板带生产的高效率、高效益、高质量和低功耗自动化技术一直对轧制技术的发展起着至关重要的作用。近代轧制技术的进步, 往往是引自动控制新技术的直接结果另一方面正是轧制技术进步对自动控制不断提出新的需求, 推进着自动化技术的进步两者已密不可分本课题介绍了由西门子S7-300PLC和工业PC机组成的四辊可逆冷轧系统的硬件配置和软件组成，本课题结合本校的轧钢实验室，通过监控系统的应用设计，从而对可逆冷轧机的过程控制、数据报表、报警等实施监控。 本课题采用了西门子公司的工业控制组态软件WinCC，设计开发了数据采集和实时监控系统，监控界面画面直观、操作简便、故障处理和报警功能完善，大大减轻了控制操作和系统维护的工作量。同时，在监控系统中增设了控制功能，作为系统的备选控制方式，使系统具有较高的可靠性。 关键词可逆冷轧机，PLC-300，监控 Reversible cold-rolling mill PLC-300 supervisory system application design Abstract With the development of industry, the production of cold-rolled plate and strip are also put forward higher requirements, which further promote the development of automatic control technology of cold-rolled. Only a high level of automatic control system will be able to access high-quality finished steel strip, the automation technology which ensure plate and strip production efficient and cost-effective, high-quality and low-power has always played a vital role in the development of rolling technology .Modern rolling technology progress, is often caused by a direct result of new technologies. On the other hand, it is just the consistent new demand to the automatic control by rolling technology progress that promote the progress of the automation technology,the two have been inseparable. This topic introduces the hardware disposition and software composition of four roller reversible cold rolling system which is composed by Simens S7-300PLC and industry PC machine , this topic unifies the steel rolling laboratory of our school, through theapplication design supervisory system , thus to monitor the reversible cold-rolling mill process control, the data report form, and reports to the police and so on. This topic uses Siemenss industry control configuration software WinCC, the design has developed the data acquisition and the real-time monitoring system, the monitoring contact surface picture is viewed directly,and operated si