[工程科技]Flowmaster教程02.pptVIP

Section 2 : The FLOWMASTER System General menu options Options File Locations Displays current settings Allows for modifications Choosing a DataManager Select Browse to select the DataMngr.FMmng Starting a FLOWMASTER session Project window Push Pin Add Details About the Project Project Units Pack/Unpack Create New Network Create new network Name Owner Description Training window Complete network drawing Overall view Family toolbars Commands toolbar Zoom toolbar The zoom functions apply to network diagrams and re-scale Component symbols Text options There are 3 types of text: node text component text network text Invoked by selecting from the toolbar Text options Text can be associated to the nearest component or super-component The options can be accessed by ‘alternate’ clicking on the network schematic Configuration files Network configuration settings can be defined Allowing changes to colours, text and options These can be stored as group or individual preferences Component data entry Copy data Any data item that has a tick is copied Copy Method: Component data required Upstream pressure source total pressure = 1.5 bar Discrete loss area = 7.85x10-3 m2 forward loss coefficient = 50 reverse loss coefficient = 50 Pipe length = 100 m friction option 1 roughness = 0.025 mm diameter = 0.1 m Orifice pipe diameter = 0.1 m orifice diameter = 0.05 m Downstream pressure source total pressure = 1 bar Component collection criteria Node data entry Node collection criteria Node data required Elevations shown All nodes are ‘wet’ No nodes have the autovap model General data Same sheet as for component data entry Data required : fluid type Water (SS) Hydrol 46 (FS) ambient temperature = 20 oC atmospheric pressure = 1 bar Start Analyse Errors, Warnings and Log Files Error File written to if analysis fails error messages point to the problem empty if run successful Warning File contains assumptions made non-convergence warnings parameter out of range and curve extrapolation war