异步电机的功率因数控制系统----硬件设计本科信电学院毕业设计.doc

毕业设计（论文）任务书 题目： 学生姓名： 学号： 专业班级： 学院： 设计起止日期： 2013年4月1日~2013年6 月9 日 题目性质一： 实际工程 设计项目 科学研究 理论研究 其他 题目性质二：√真题 模拟题目 其他 技术要求及原始数据： 主要掌握系统的组成及控制策略。系统主要以为核心；功能电路包括键盘操作等。主要任务： 学 生 （签 字）： 系主任（签字）： 指导教师（签字）： 院 长 （签字）： Abstract With economic development, China has become the worlds major industrial countries. The main drivers of industrial induction motor, induction motor efficiency depends on the power factor, so the production process, often need asynchronous motor power factor in real-time, accurate measurement and control, in order to improve the efficiency of asynchronous motors, reducing energy consumption and reduce pollution. This article describes the use of SCM AT89C51 to asynchronous motor power factor measurement and control hardware circuit design methods. This article describes the use of SCM AT89C51 to asynchronous motor power factor measurement and control hardware circuit design methods, the principle is by measuring any one phase induction motor phase current and the other two phases of the phase relationship between the line voltage to get induction motor power factor line detection method presents a practical power factor measurement circuit and the measuring principle of the method is described in detail. The design of the hardware part of the signal acquisition circuit, analog-digital conversion circuit SCR trigger circuit and display circuit, and the like. Hardware and software design of the main task is to voltage and current zero crossing detection, calculation of the thyristor firing angle control and power factor display. This design has the hardware connection is simple, rapid, and convenient features to achieve. Keywords: asynchronous motor; power factor; AT89C51;zero-crossing detection目 录