毕业设计（论文）-基于单片机的感应自动门控制器的设计文档.docVIP

华北理工大学轻工学院 QINGGONG COLLEGE, NORTH CHINA UNIVERSITY OF SCIENCE AND TECHNOLOGY 毕业设计说明书 设计题目：基于单片机的感应自动门控制器的设计 学生姓名： 学 号： 专业班级： 学 部：信息科学与技术部 指导教师： 2015年06月09日 摘 要 现如今自动化、信息化程度越来越高，单片机的应用领域也越来越广，成为人们生活不可或缺的一部分。随着社会的发展、科技的进步以及人们生活水平的逐步提高，各种方便于生活的自动控制系统开始进入了人们的生活，以单片机为核心的自动门系统就是其中之一。热释电型Abstract Nowadays automation, informationization level is higher and higher, MCU application field is becoming more and more widely, become an indispensable part of peoples life. With the development of the society, the progress of science and technology and the improving of peoples living standard, all kinds of convenience in life start into the automatic control system of peoples lives, with the single chip processor as the core of the automatic door system is one of them. Also marks the automatic controlled field became a member of the digital age. Its practicability is strong, the function is all ready, technology advanced, make people believe its the result of scientific and technological progress. It is more to understand people, the development of the digital era will change human life, will speed up the development of science and technology. This paper focuses on the design with 89C52 as the main body, pyroelectric infrared sensor, dc stepper motor as the core of automatic door control system, etc. It give full play to the performance of the microcontroller, the advantages of hardware circuit is simple, software function is perfect, reliable control system, the characteristics of high cost performance, has certain use and reference value. Keywords automatic door; single chip microcomputer; stepping motor; pyroelectric infrared sensor 目 录 摘 要 I Abstract II 第1章 绪论 1 1.1 课题背景 1 1.2 自动门在国内外的发展状况 1 1.3 课题研究的意义和目的 2 1.4 主要研究内容 2 1.5 本章小结 3 第2章 系统总体设计方案 4 2.1 系统总体规划 4 2.2 器件介绍 4 2.2.1 89C52单片机 4 2.2.2 热释电型红外线传感器 8 2.2.3 步进电机 9 第3章 硬件设计 11 3.1 基本单片机系统 11 3.2 热释电红外检测电路 12 3.4 控制电路 13 第4章 软件设计 14 4.1 整体顺序流程图 14 4.2 功能模块程序 15 4.2.1 定义变量及主程序 1