基于51的1602数字时钟设计.docVIP

#includereg51.h #define uchar unsigned char #define uint unsigned int sbit M=P1^0; sbit A=P1^1; sbit I=P1^2; sbit Spker=P1^3; sbit lcden=P1^4; sbit rs=P1^5; uchar Anum=0,Mnum=0,Inum=0,bs=0; uint year=2000; uchar count=0,miao=0,fen=0,shi=0,mouth=1,day=1,dayqd; uchar hmiao=0,miao1=0,fen1=0,shi1=0; uchar miao2=0,fen2=0,shi2=0; uchar code table[]= Time; uchar code table1[]= 00:00:00; uchar code table2[]= Date; uchar code table3[]= Meter; uchar code table4[]= 00:00:00:00; uchar code table5[]= Beepoff; void delay(uint z) { uint x,y; for(x=z;x0;x--) for(y=110;y0;y--); } void write_com(uchar com) { rs=0; lcden=0; P0=com; delay(1); lcden=1; delay(1); lcden=0; } void write_date(uchar date) { rs=1; lcden=0; P0=date; delay(1); lcden=1; delay(1); lcden=0; } void init() { uchar num; lcden=0; write_com(0x38); write_com(0x0c); write_com(0x06); write_com(0x01); write_com(0x80); for(num=0;num15;num++) { write_date(table[num]); } write_com(0x80+0x40); for(num=0;num12;num++) { write_date(table1[num]); } TMOD=0x11; TH0=(65536-50000)/256; TL0=(65536-50000)%256; TH1=(65536-10000)/256; TL1=(65536-10000)%256; EA=1; ET0=1; ET1=1; TR0=1; TR1=0; } void write_sz(uchar add,uchar date) { uchar shi,ge; shi=date/10; ge=date%10; write_com(0x80+0x40+add); write_date(0x30+shi); write_date(0x30+ge); } void write_year(uchar add,uint date) { uchar qian,bai,shi,ge; qian=date/1000; bai=date%1000/100; shi=date%1000%100/10; ge=date%1000%100%10; write_com(0x80+0x40+add); write_date(0x30+qian); write_date(0x30+bai); write_date(0x30+shi); write_date(0x30+ge); } /*************************时间显示及时间调节*******************************/ void timeinit() { uchar num; write_com(0x01); write_com(0x80); for(num=0;num12;num++) { write_date(table[num]); } write_sz(4,shi); write_com(0x80+0x40+6); write_date(:); write_sz(7,fen); write_com(0x80+0x40+9); write_date(:); write_sz(10,miao); } void timekey() { if(A==0)