asco电磁阀1.pptVIP

* Slide 4669: Picture of 8344 Four-Way Valve As we discussed with 2- and 3-Way Valves, we have Direct Acting and Internally Piloted Valves. The same is true with 4-Way Valves to obtain higher pressures and high flow capacities. As with internally piloted valves, they require a Minimum Operating Pressure Differential. The 8344 is an Internally Piloted Floating Piston Valve with pipe sizes up to 1” NPT. * Slide 1469A: Picture of Dual Solenoid 8344 As with the 8342, the 8344 valve is available in the Dual Solenoid Construction where the valve position is to be maintained in the event of a power failure. * Slide: Picture of 8551 These are the 8551 valves, which have a NAMUR (see below) pad mount interface for mounting directly to the actuator. They have a unique sealing technology, which uses a combination of hard T-seals and flexible O-Rings to provide bubbletight shutoff, resistance to dirt and a multi-million cycle life. These valves conform to international standards and are for use with air and inert gas. The 8551 Solenoid Enclosures are available in NEMA Types 1 through 9. ------------------------------------------------------------------------------------------------------- What is NAMUR Mount? NAMUR is a German standardization committee (Norm Ausschuss Mess Und Regeltechnik) which is comprised of representatives from Germany’s largest chemical companies. They have developed standards for actuator mounting configurations for solenoid valves, top accessories and mounting the actuator to the main process valve. The NAMUR mounting pattern has become popular because it offers users a high level of standardization and installation/maintenance simplification. The NAMUR standard is being accepted more and more by the process industries outside of Europe. The NAMUR interface is characterized by the location of the two pressure ports and two mounting holes to secure the pilot valve to the actuator. The mating surface is symmetrical, allowing 180° rot