永磁电机齿槽转矩的研究分析_邓秋玲.pdfVIP

3 8 3 ( ) Vol. 38, No. 3 2 0 1 1 3 Journal of Hunan University( Natural Sciences) Mar1 2 0 1 1 : 1 74-2974(2011) 03-005-04 * 1, 2 1­ 1 1 邓秋玲 ,黄守道 , 刘 婷,谢 芳 ( 1. , 410082; 2. , 411101) : 研究了永磁电机齿槽转矩产生的机理和降低齿槽转矩的一些措 . 以4 极48 槽表面式稀土永磁同步电动机为例, 利用二维有限元法分析了极弧系数磁极偏移和开辅助 槽对永磁电机齿槽转矩的影响. 将理论分析得到的齿槽转矩结果与样机的齿槽转矩测试结 果进行了比较, 两者基本吻合. 研究表明: 通过选择合理的方法能够有效地降低齿槽转矩. : 永磁电机; 齿槽转矩; 磁场分析; 有限元分析 : TM 351 : A Study of Cogging T orque in Permanent-magnet M achines 1, 2 1­ 1 1 DENG Qiu-ling , HUANG Shou-dao , LIU Ting , XIE Fang ( 1. College of Electrical and Information Engineering, Hunan Univ, Changsha, H unan 410082, China; 2. Collegeof Electric and Information Engineering, Hunan Institute of Engineering, Xiangtan, Hunan 411101, China) Abstract : The mechanism of the cogging torque generated in permanent magnet machines and some measures to reduce cogging torque w ere studied. Taking a rare earth type, permanent magnet synchronous motor with four poles, forty-eight slots, surface-mounted as an example, this paper analyzedthe influence of pole arc coefficient, magnet pole displacement and adding supplementary slot on cogging torque in a two-dimensional finite element analysis method. The computed cogging torque values were comparedw ith the experiment values of the sample machine, both of which agree with each other w ell. The research results have indicated that, w ith the appropriate choice of these methods, the cogging torque c