以便自动产生应用程式的Makefile.docVIP

安裝 tmake1.13 以便自動產生應用程式的Makefile 檢查~/Qtopia/ARM/qt-2.3.7/src/tools/ 目錄下的qconfig-qpe.h，是否所有預設的物件皆打開。若所所需的物件沒打開，須修改qconfig-qpe.h然後再重新編譯qt-2.3.7-embedded及qtopia-free-1.7.0。 root@s608:~/#gedit ~/Qtopia/ARM/qt-2.3.7/src/tools/qconfig-qpe.h // Space savings: features insufficiently useful on handheld device #define QT_NO_IMAGEIO_PPM #define QT_NO_NETWORKPROTOCOL #define QT_NO_PICTURE #define QT_NO_PRINTER #define QT_NO_QWS_SAVEFONTS // Space savings: features impractical on small display #define QT_NO_COLORDIALOG #define QT_NO_FILEDIALOG #define QT_NO_FONTDIALOG // Space savings: features impractical on stylus device #define QT_NO_DIAL #define QT_NO_DRAGANDDROP #define QT_NO_IMAGE_TEXT #define QT_NO_INPUTDIALOG #define QT_NO_PRINTDIALOG #define QT_NO_PROGRESSDIALOG #define QT_NO_SEMIMODAL #define QT_NO_SIZEGRIP #define QT_NO_SPLITTER #define QT_NO_WORKSPACE // Speed savings: features that incur unacceptable performance penalty #define QT_NO_DOM #define QT_NO_EFFECTS #define QT_NO_TRANSFORMATIONS // Qt 3 features (not relevant at this time) #define QT_NO_TRANSLATION_BUILDER #define QT_NO_COMPLEXTEXT 解壓縮tmake-1.13.tar.gz檔案： root@s608:~/#tar xvfz tmake-1.13.tar.gz 將所解壓縮後所慘產生的tmake-1.13資料夾移至/usr/local/ root@s608:~/#mv tmake-1.13 /usr/local/ 修改根目錄下的.bashrc增加如下指令： root@s608:~/#gedit ~/.bashrc TMAKEPATH=/usr/local/tmake-1.13/lib/qws/linux-arm-g++ PATH=$PATH:/usr/local/tmake-1.13/bin export PATH TMAKEPATH 重新啟動.bashrc root@s608:~/#source ~/.bashrc。 1. 在ARM端執行QT或其他應用程式： 欲用tmake功能產生在ARM-9執行的應用程式，須在/etc/profile檔案增加以下設定： #---------------------------------------------------------------------------------------------- PATH=$PATH:/usr/local/arm/2.95.3/bin export PATH #tmake for ARM TMAKEPATH=/usr/local/tmake-1.13/lib/qws/linux-arm-g++ PATH=$PATH:/usr/local/tmake-1.13/bin export TMAKEPATH PATH #end tmake #QTDIR for ARM export QTDIR=/root/Qtopia/ARM/qt-2.3.7 export PATH=$QTDIR/bin:$PATH export MANPATH=$QTDIR/doc/man:$MANPATH export LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH #end #add bit