第六代全自动结鞭机的设计.docVIP

摘 要 第六代全自动结鞭机主要用于外径5~12mm范围的花炮结鞭，每分钟可结鞭大于等于400个的速度。设计从生产一线实地学习入手，再了解现有花炮机械的生产状况和未来发展前景，此机器集下料、结鞭、卷盘于一体，分担了下料、结鞭的设计计算。其主要执行机构有人工下料、自动结鞭，平面连杆机构等，还包括其他零部件如输送平带，送料摆轮、主传动轴的设计。说明书整理并介绍了整个设计流程以及设计中遇到的问题和解决方式，依次介绍下料部件、结鞭部件、平面凸轮机构等的设计步骤设计数据和如何使用3D建模等。说明书中还提供了诸多3D建模图片，可以更直观的了解结鞭机下料、结鞭等机构，还提供了传动系统的设计，由于本设计注重的下料结鞭部分，故卷盘、计数等均不在重点之内。也未作详细说明。 关键词 : 一体化，花炮机械，自动结鞭，双斗下料 ABSTRACT The sixth generation of fully automatic machine mainly used for colorectal whip outside diameter range of 5 ~ 12mm knot Fireworks whip, whip knot per minute greater than or equal to the speed of 400. The design of the field to learn from the production line to start, and then fireworks mechanical understanding of the existing production and future development prospects, the cutting machine set, knot whip, reel in one, sharing the next expected, the design and calculation of binding whip. The main implementing agencies under the artificial feed, automatic knot whip, planar linkage, but also include other components such as flat belt conveyor, feed balance wheel, the design of the main shaft. Manual collation and describes the entire design process and design problems and solutions, in turn, introduced under the expected components, whip end components, such as graphic design of cam mechanism design data step and how to use 3D modeling. Manual also provides a number of 3D modeling pictures, can be more intuitive understanding of knot machine cutting whip, whip, such as node, but also provides a drive system design, design-oriented as a result of the cutting end of the whip in part, the reel, not counting all of the focus. Did not elaborate. Key words: integration, fireworks machinery, automatic stiching-cracker;double bucket cutting 目 录 第1章 绪论 4 1.1相关市场 4 1.2相关技术 5 1.3相关设备 6 1.4发展方向 6 第2章 总体方案设计 8 2.1 功能应用 8 2.2 工艺分析 8 2.2.1确定结鞭程序 8 2.2.2确定工艺路线 9 2.2.3绘制总体布局图 11 2.2.4对执行构件的运动要求 12 2.3 绘制结鞭总体布局图 13 2.4 布置执行机构分布图 13 2.5 布置传动系统 13 第3章 各执行机构的设计计算 14 3.1下料机构 11 3.2自动结鞭机构 15 3.3凸轮机构设计 19 第4章 传动系统的设计计算 24 4.1电动机的选择