用vb发送组合键代码（Send the key combination code with VB）.docVIP

用vb发送组合键代码（Send the key combination code with VB） Classification using VB to send key combination code 2010-10-25 10:34:25|: programming | Tags: | font in Small subscription Send the Ctrl+A key Keybd_event, VK_Ctrl, MapVirtualKey (VK_Ctrl, 0), 0, 0 press the Ctrl key PostMessage, hWnd, WM_KEYDOWN, VK_A, MakeKeyLparam (VK_A, WM_KEYDOWN) - press the A key Sleep 500 500 milliseconds delay PostMessage, hWnd, WM_UP, VK_A, MakeKeyLparam (VK_A, WM_UP) - release the A key Keybd_event, VK_Ctrl, MapVirtualKey (VK_Ctrl, 0), KEYEVENTF_KEYUP, 0 release the Ctrl key Send the Alt+E key PostMessage, hWnd, WM_SYSKEYDOWN, VK_E,press the Alt+E key, VK_E (scan code 12), is the twenty-ninth bit of the lParam, and set 1 to indicate that the Alt key is pressed WM_SYSKEYDOWN description: The WM_SYSKEYDOWN message is posted to the window with the keyboard focus when the user holds down the ALT key and then presses another key. It also occurs when no window currently has the keyboard focus; in this case, the WM_SYSKEYDOWN message is sent to the active window. The window that receives the message can distinguish between these two contexts by checking the context code in the lKeyData parameter. WM_SYSKEYDOWN NVirtKey = wParam (int); / / virtual-key code LKeyData = lParam; / / key data Parameters NVirtKey Value, of, wParam., Specifies, the, virtual-key, code, of, the,, key, being, pressed. LKeyData Value, of, lParam., Specifies, the, repeat, scan, code, extended-key, flag, context, code, previous, key-state, flag, and, transition-state, flag, as, count, shown, in,, the, following, table: Value Description The Specifies the repeat count. The value the number is of times the keystroke is repeated as the a result of the user holding down key. The Specifies the scan code. The value depends on the original equipment manufacturer (OEM) 24 Specifies whether the key is an extended key, such as the right-hand ALT and CTRL keys that appear on an enhanced 101- or 102-key keyboard. The