利乐包材培训教材幻灯片.ppt

* * * * * * Conductivity Test If there is a leakage in the package or damage to the inner plastic layer, a current will flow though the circuit, and the ampere meter gives a reading. The salt solution and the aluminium foil in the package material conduct the current through the circuit. It is recommendable to perform this test at first start up both after the filler and also after the last in line installed DE-equipment. It is also recommendable to perform Conductivity test at events as package material changes like new design and new PO-order takes in use. The Conductivity test can not be a substitute to the Tear down test, because they have to complete different goals. The Conductivity test is used to check the package and with the Tear down test checks the sealings, but they complement each other. In trouble shooting is Conductivity test used as a screening test. Ampere meter Sp.No 90243-110 * Conductivity Test If there is a leakage in the package or damage to the inner plastic layer, a current will flow though the circuit, and the ampere meter gives a reading. The salt solution and the aluminium foil in the package material conduct the current through the circuit. It is recommendable to perform this test at first start up both after the filler and also after the last in line installed DE-equipment. It is also recommendable to perform Conductivity test at events as package material changes like new design and new PO-order takes in use. The Conductivity test can not be a substitute to the Tear down test, because they have to complete different goals. The Conductivity test is used to check the package and with the Tear down test checks the sealings, but they complement each other. In trouble shooting is Conductivity test used as a screening test. Ampere meter Sp.No 90243-110 * Conductivity Test If there is a leakage in the package or damage to the inner plastic layer, a current will flow though the circuit, and the ampere meter gives a reading. The