唐潮小哥英文文献.doc

Product Appearance Designs Based on Reverse Engineering Reverse engineering and its applications In the industrial field, often encountered the demand to build its three-dimensional digital model under the model or in kind. This use of reverse engineering, which refers to a means of measuring the physical model or measurement that digital sampling, and then under the three-dimensional geometric measurement data through the physical reconstruction of Modeling The CAD digital model to achieve product design and manufacturing process. The practical application for Reverse engineering in the industrial manufacturing area includes the following: a) the design of new parts, mainly for imitation or modified product design; b) have been copying and imitation parts, and reproduce the original product design, complex products such as imitation; c) damaged or worn parts of the reduction, in order to repair or re-used; d) product testing, testing of products such as the deformation, welding quality testing, so as to the urgency of processed products with 3-D digital model of the error for analysis. In manufacturing, reverse engineering has become the digestion and absorption of new technologies and secondary development of one of the important building Drive. Improved design as an important tool, which effectively accelerated the response to market new products faster. At the same time, reverse engineering for the rapid prototyping provided a good technical support. The manufacturing sector to become an important and simple transmission of information received from one of the ways. In addition, Reverse engineering has better applications in arts and culture, the medical field, including the wooden model or clay sculpture art aesthetic design, digital artifacts and digital museums, such as virtual surgery. The structural system of Reverse engineering Reverse engineering system mainly consists of three parts: product physical geometry of the figures, CAD model reconstruct