15KPA瞬态抑制二极管.pdf

【领先的片式无源器件整合供应商 — 南京南山半导体有限公司 】 15KPA SERIES DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS – 15KPA SERIES FEATURE Plastic package. Glass passivated junction. 15000W Peak Pulse Power capability on 10/1000μs waveform. Excellent clamping capability. Repetition rate (duty cycle):0.05%. Low incremental surge resistance. Fast response time: typically less than 1.0ps from 0 Volts to BV, Bidirectional less than 10ns. P600 High temperature soldering guaranteed: 265°C/10 seconds/.375, (9.5mm) lead length, 5lbs., (2.3kg) tension. MECHANICAL DATE Case: Molded plastic over glass passivated junction. Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026. Polarity: Color band denotes positive end (cathode) except Bipolar. Mounting Position: Any. Weight: 0.07 ounce, 2.5grams. DEVICES FOR BIPOLAR APPLICATION For bidirectional use C or CA suffix for types 15KPA17 thru types 15KPA280 (e.g. 15KPA17C, 15KPA280CA), electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified RATING SYMBOL VALUE UNITS Peak Pulse Power Dissipation on 10/1000s waveform PPPM Minimum 15000 Watts (Note1, Fig.1). Peak Pulse Current of on 10/1000s waveform.(Note1,Fig.3) IPPM See Table Amps Steady State Power Dissipation at T =75 ,Lead lengths.375”, L