二级机电建造师——管道工程的分类和施工程序（Two grade mechanical and Electrical Engineer -- Classification and construction procedure of pipeline engineering）.docVIP

二级机电建造师——管道工程的分类和施工程序（Two grade mechanical and Electrical Engineer -- Classification and construction procedure of pipeline engineering） This paper is contributed by sulone2856 DOC documents may experience poor browsing on the WAP side. It is recommended that you select TXT first or download the source file to the local machine. Classification and construction procedure of pipeline engineering 2H313060 pipeline construction technology industrial pipeline engineering including: heat pipe system; compressed air, oxygen pipeline system; oil and gas pipeline system; jacketed piping system; pipeline system; and other pipeline system etc.. The main points of this paper are: classification of pipeline engineering, construction procedure and key points of pipeline engineering, test and flushing requirements of pipeline system. 2H313061 master classification construction procedure of pipeline engineering, industrial pipeline engineering -- remember the basis for classification: Classification Based on the basis that are in accordance with the pipe material, the conveying medium and medium parameters (pressure and temperature) can be divided into the following categories: 1. according to the classification of material properties: divided into metal pipes and non metal pipeline. 2. according to the design pressure rating: pipeline engineering transmission medium pressure range is very wide, from vacuum negative pressure to hundreds of mpa. The industrial pipeline can be divided into vacuum pipeline, low pressure pipeline, medium pressure pipeline, high pressure pipeline and ultrahigh pressure pipeline with the design pressure as the main parameter. 3. according to the conveyor temperature classification: industrial pipeline transportation medium temperature difference is great, according to the medium temperature can be divided into low temperature pipeline, temperature pipe, moderate and high temperature pipeline. 4. classification according to the nature of the transmission