FAPG SRAM 地址0写入0x5A并读出显示到8位LED.docVIP

module sram_wr ( //sram接口 output reg[17:0] addr, inout [15:0] data, output reg ce_n, output reg oe_n, output reg we_n, output reg ub_n, output reg lb_n, output reg[7:0] led, input clk, input rst ); parameter DIV_1S = parameter SPECIFIED_WORD = 16H5A5A; reg[1:0] state; reg[15:0] buf_write[0:15]; wire[15:0] data_i; reg[15:0] data_o; reg data_oe; assign data = (data_oe==1B1)?data_o:{16{1BZ}}; assign data_i = data; reg[31:0] delay_counter; always @(posedge clk, negedge rst) begin if(~rst)//高电平复位