Unit 2 Fabrication2单元制造.ppt

* * * * * * * * * * * * * * * Unit 2: Fabrication Design and Fabrication 1202 Purpose Introduction to the operation and environment of an industrial shop Learn how to operate power and hand tools through the fabrication of simple projects in the shop accompanied by supporting activities in the classroom. Hands on experience that is required to relate design to fabrication. First you will learn the shop safety rules and how to use common metrology tools. Then the safe operating practices for hand/power tools found in an industrial production shop, and develop an awareness of the related environmental impacts that should be considered. Finally, you will explore shop related careers. Topic 1: Safety (2hrs) Identify Hazards Safety Rules Steps to follow in a Shop Emergency Handout, Shop Emergency Plan Handout, Hazardous Condition Report Form MSDS Together Identify safety footwear, safety glasses, full face shield, leather gloves, coveralls, ear plugs, and ear muffs. Develop the General Shop Safety rules and post in a common area of the shop. URL’S http://www.tru.ca/hsafety/workinglearningsafely/work/machineshop.html /info/OSH/shop.html http://www.worksafesask.ca/files/ont_tsao/shop2.html /mie213/Generalshopsafetyrules.pdf Material Safety Data Sheets (MSDS) When working with chemicals you need to know: What they are made of What harmful effects they can have How to handle them How to dispose of them First-Aid treatment if exposed or eaten All this information is found on a MSDS sheet. More info /MSDS/ref/whmis.html /msdssrch.asp Activity Perform a tour of the shop: Create a MAP of the room Locate the FIRE EXTINGUISHERS Locate the EMERGENCY SHUT OFF BUTTONS Locate the EYE WASH STATION Locate the FIRE EXIT (White Triangle) Spot the HAZARDS and fill out the Hazard Report Form Quiz General Shop Safety Quiz Topic 2: Shop Practices Metrology the scientific study of measurement  Units Metric (mm, cm, m, km) Imperial/US standard (Inch, Foot, Yard, Mile) Activ