集装箱CIC检验标准.ppt

Interchange Standards 一個單一的概念將是理想的交換標準，但我們的行業發展了不同的方式, 製造了一些混亂 The concept of a single interchange standard would be ideal but our industry has developed in different ways creating some level of confusion and inefficiencies 不過…. However… 交換標準之間的區別僅限於幾個準則 The differences between interchange standards are limited to few criteria * IICL技術公告第004號，2006年11月1日標題：?evised刺修復集裝箱地板 IICL TB 004, 1 November 2006Title: “Revised Dowel Repair in Container Floors” Revised Criteria Holes up to 22 mm in diameter may be repaired by inserting a round hardwood dowel into the hole and securing it into place with glue. The following limitations apply to the use of dowels: Dowels must be round and made of hardwood. Dowels cannot exceed 22 mm in diameter. The minimum distance between the end of any floor board, plank or screw any part of a dowel is 50 mm (2 inches). The minimum distance from the side of a floor board and any part of a dowel is one (1) times the dowel diameter. The minimum distance from any part of a dowel to any part of another dowel is four (4) times the larger dowel diameter. Holes up to 22 mm that cannot be repaired using dowels that meet the minimum distance requirements above, and all holes greater than 22 mm in diameter, must be repaired by sectioning or replacement of the wood. * Source: www.IICL.org 總結 ...Summarizing… CIC是基於內部和外部的信封標準 CIC is based on internal and external envelope criteria 通過採用一個”封套”標準， CIC使檢測更容易，大大降低了面版維修的機會 By adopting an envelope criteria, CIC makes inspections easier and greatly reduces panel repairs * END. * Collaborative TrainingAmended IICL 5 / CIC  Handouts * * * * * * * “Handouts” Cover page Slide 15 Complete amended IICL table Slides 32, 33, 34,35, 37, 39,40,41 and 44 * Container Owners Association - COA study and comparison CIC versus IICL 5 April – Aug 2009 * ?Participants in the Working Group ??Shipping Lines ?Container Leasing Companies Maersk Line