Dynamic Dispersion Bump (Dispersion Un-suppressor)动态色散凹凸（色散联合抑制）.pptVIP

Dynamic Dispersion Bump(Dispersion Un-suppressor) Provide a well contained limiting momentum aperture to “catch” all un-captured beam at the beginning of the ramp. Apply a dispersion time bump to MI30 zero dispersion straight section only on selected cycles (slip-stacking) to generate dispersion at 302 (and 308). Use fixed collimator at 302 (radial inside) as the limiting momentum aperture to “catch” the un-captured beam at the start of acceleration Utilize local dipole time bump to assure limiting aperture Straight section optics are not effected during pbar transfers (i.e. zero dispersion/ nominal betas) Bump is turned on after injection (for catching un captured beam) Collapse bump to return to nominal optics after ~ 10 GeV. Dynamic Dispersion Bump II(Dispersion Un-suppressor) Concept could be expanded to potentially clean up un–captured beam during the slip stacking process itself Turn dispersion un-suppressor (and dipole time bumps) at injection if a beta wave allows (need to keep matched to MI-8) Install collimator at 308 (radial outside) and use dipole bump to move higher momentum beam onto collimator Could be expanded even further to collimate vertically (at 301) Vertical beta function increases from 60 to 80 meters at 301 during dynamic dispersion bump. Some numbers Energy spread during slip stacking Df = +/- 1400 hz - Dp = +/- 26 MeV bucket separation Bucket height +/- 7 Mev Total energy spread Dp = +/- 33 MeV Dp/p (max) = +/- 0.37% sT = 4.47 mm for b = 60m and e=20 p sL = 0.65 mm with sp/p = 0.33E-3 How fast does un-captured beam move radially inward? At 6 GeV/sec - .06 MeV/turn 20G/s - .2Mev/turn - Dp/p ~ 0.0006% 0.0022% - Dx ~ 13 mm/turn ( D of 2 m) 45 mm/turn So, un-captured beam is scraped in ~10 ms once it contacts the aperture (i.e. 66 MeV/.06MeV/tur