[工程科技]ACQUA Acoustic Test presentation_English.pptVIP

ACQUA Acoustic Testpresentation MTK WCP_H/W Seven_Yang Outline： 1、Spec. Intro. 2、Hardware environment (CMD55) 3、Software environment (ACQUA+META) 4、Test items (CTTL) 5、Attention items 1、Spec. Intro. 2、Hardware environment (CMD55) Acoustic chamber Instrument Description: CMD55: Radio communication tester. MFE VI: Measurement frontend. MFE IV forms the connecting link between data acquisition via the artificial mouth/ear and digital speech quality analysis with ACQUA. HMA IV: HEAD Mouth Amplifier. It is used as an extension of MFE VI to control the artificial mouth. HLC I: (CMD55 use only) HLC I is a bi-directional stereo interface for matching the input and output levels of the unbalanced connectors of the HEAD acoustics measurement frontend MFE VI and the radio communication tasters CMD55 or CMU200. ACQUA Acoustic Test _Using CMD55 Used Components CMD 55(Handset mode) MFE VI HMA IV HLC I ACQUA Acoustic Test _Using CMD55 Set up connection: Placement of phone using TYPE1 3、Software environment ACQUA Setting: 3、Software environmentMETA (Version 3.7) Fine tuning in META RFR tuning flow block Load All-Pass Parameters to NVRAM ACQUA (1) Get “.hdf” File 1. Select the test result which will be used for FIR tuning. ACQUA (2) Transform “.hdf” to “.txt” 1. Use the program “HDF2Text” provided by ACQUA, and open the “.hdf” file. ACQUA (3) Transform from “excel” file ACQUA (4) Transform from “excel” file ACQUA (5) Transform from “excel” file FIR Tuning (1) FIR Tuning (2) FIR Tuning (3) Change the value to 1 will increase the sound volume Load the Parameter to NVRAM Volume Setting (1)Microphone Volume Setting (2)Speech Tone Volume Setting (3)SideTone For example If the SLR is 14dB, test item will fail because the spec. is 8+/-3dB. We decrease 6dB to let SLR down to 8dB, so there are 2steps and we will increase 32 at the Microphone. The rode is: engineer mode(*#3646633#)\Audio\normal\Microphone 4、Test items (CTTL) Total 7 test item