(极重要)Vector Control of Unsymmetrical Two-Phase Induction Machines.pdf

Vector Control of Unsymmetrical Two-Phase Induction Machines Mircea Popescu, Dan M. Ionel*), David G. Dorrell SPEED Laboratory, Department of Electrical Engineering, University of Glasgow, Glasgow G12 8LT, Scotland, UK *) Invensys Brook Crompton, Central Research and Development, Huddersfield HD1 3LJ, England, UK Abstract – A general model suitable for the vector control of II. MATHEMATICAL MODEL the unsymmetrical two-phase induction machines is presented in the paper. Both the rotor flux oriented and the stator flux The proposed model is based on several assumptions, oriented control strategies are analysed and their suitability for generally acceptable [8]: low and high-speed operation is discussed. In the mathematical model the machine main and auxiliary winding are represented 1) only the fundamental space-harmonic component of in the stationary reference frame and the effect of core losses the air-gap flux distribution is considered, and the main flux path saturation are included. A special 2) there is a unique distinct non-linear magnetisation technique is used to model different levels of saturation on the curve along each of the two orthogonal axes of the two axes of magnetisation. The model can be employed for the machine (the magnetic-flux saturation effects are accurate simulation of both the steady-state and the transient modelled and superposition is not used), operation of the unsymmetrical two-phase induction machines. 3) the core