UG在桶盖凸模制造中的应用实例--曾经年少.docVIP

UG在桶盖凸模制造中的应用实例 曾经年少 长沙 410082 (College of Mechanical and Automotive Engineering, Hunan University, changsha 410082) 摘要：在UG加工桶盖凸模的实例中，共用了五道工序。第一步作型芯的初加工（φ10平底刀）；二桶盖曲面初加工（φ6球刀）；三桶盖曲面精加工（φ6球刀）；四作型芯侧壁的精加工（φ10平底刀）；五支撑扳的侧壁的精加工（φ10平底刀）；最后作曲面清角加工（φ2球刀）。 关键词:桶盖的制造 凸模 初加工 精加工 辅助面 Abstract: The manufacturing of barrel convex mold includes the following six steps with the manufacturing application of Ug software: the first , rough machining , the second , finish machining for the curved surface of the barrel, the third, finish machining for the sidewall of the mold core ，the fourth ,finish