MATLAB在二进制数字调制仿真中的应用(修改).pdfVIP

合肥师范学院08 级本科在校生MATLAB 课程论文 MATLAB论文设计 论 题 MATLAB在二进制数字调制中的应用 装 系 别 物理与电子工程系 订 线 班 级 08 电子信息工程 （2）班 学 号 0808211004 姓 名 夏 云 合肥师范学院08 级本科在校生MATLAB 课程论文 MATLAB 在二进制数字调制中的应用 摘 要 在实际中的大多数信道因具有带通特性而不能直接传送基带信号，这是因为 数字基带信号往往具有丰富的低频分量。为了使数字信号在带通信道中传输，必 须用数字基带信号对载波进行调制，以使信号与信道的特性相匹配。这种用数字 基带信号控制载波，把数字基带信号变换为数字带通信号的过程称为数字调制。 在接收端通过解调器把带通信号还原成数字基带信号的过程称为数字解调。在这 篇论文中我以二进制数字调制系统为研究对象利用matlab作为编程工具，对数字 调制系统的二进制数字调制进行了分析。通过matlab编程得到各个二进制数字调 制已调信号的图形，并对误码率进行分析，以验证不同数字调制系统间的性能差 异。 关键字：二进制数字调制 时间波形 误码率 合肥师范学院08 级本科在校生MATLAB 课程论文 ABSTRACT In reality most channel because of its band-pass characteristics cant transmitted directly baseband signal, because the digital baseband signal often have rich low-frequency. In order to make the digital signal transmission of the belt communication way, must use digital baseband signal on carrier for modulation, in order to make signal and channel characteristic matching. This digital baseband signal control with the digital baseband signal carrier, with communications, digital transformation as the process is called digital modulation. In the receiver through modem belt communication number reductive into digital baseband signal process called digital demodulation. In this paper I as binary digital modulation system as the research obj ect use of matlab as programming tool for digital modulation system, analyzed the binary digital modulation. Through matlab programming get all binary digital modulation has adjustable signal to the graphics, and analyzed to verify bit error rate between different performance of digital modulation system is differ