基于单片机和CPLD的LED点阵显示系统 附件推荐.docVIP

PAGE 附 录 /* 51控制的点阵显示C程序 */ #include reg51.H #include stdio.h #define uint unsigned int #define uchar unsigned char sbit G1 = P1^0; sbit G2 = P1^1; sbit R1 = P1^2; sbit R2 = P1^3; sbit RK_595 = P1^4; sbit SK_595 = P1^5; sbit A_138 = P2^0; sbit B_138 = P2^1; sbit C_138 = P2^2; sbit D_138 = P2^3; sbit EN_138 = P2^4; void init_IO(void); void delay(uint T); void send_byte(uchar ldata); void disp(uchar code *ziku,uchar s_color); void disp_red(void); void disp_green(void); void disp_orange(void); uchar buf[32]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};//定义32字节的缓冲区 uchar code anquan1[]={ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, //YY0 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0xc0,0x00,0xc0,0x00,0x60,0x00,0x00,0x00, 0x80,0x01,0xe0,0x01,0x60,0x00,0x00,0x00, 0xfe,0x3f,0x30,0x03,0x63,0x8c,0xff,0x07, //YY1 0xfe,0x3f,0x18,0x06,0x63,0x8c,0xff,0x07, 0x06,0x30,0xc0,0x0c,0x63,0x8c,0x01,0x06, 0x66,0x30,0xff,0x3f,0xff,0x8f,0x01,0x06, 0x60,0x00,0xfb,0x37,0xff,0x8f,0x01,0x06, //YY2 0xf7,0x3f,0xc0,0x00,0x60,0x80,0x01,0x06, 0xf7,0x3f,0xc0,0x00,0x60,0x80,0x01,0x06, 0x30,0x06,0xfc,0x0f,0x63,0x8c,0x01,0x06, 0x70,0x06,0xfc,0x0f,0x63,0x8c,0x01,0x06, //YY3 0xc0,0x03,0xc0,0x00,0x63,0x8c,0xff,0x07, 0xe0,0x0f,0xc3,0x00,0xff,0x8f,0xff,0x07, 0x7e,0x3c,0xfe,0x1f,0xff,0x8f,0x01,0x06, 0x1c,0x30,0xfe,0x1f,0x00,0x0c,0x00,0x00, //YY4 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0xe0,0x9f,0x83,0x73,0xfe,0x03,0x00, 0x00,0xe0,0x1f,0xc7,0x71,0xfe,0x03,0x00, //YY5 0x00,0xe0,0x00,0xee,0x70,0x70,0x00,0x00, 0x00,0xe0,0x1f,0x7c,0x70,0x70,0x00,0x00, 0x00,0xe0,0x1f,0x38,0x70,0x70,0x00,0x00, 0x00,0xe0,0x00,0x7c,0x70,0x70,0x00,0x00, //YY6 0x00,0xe0,0x00,0xee,0x70,0x70,0x00,0x00, 0x00,0xe0,0x1f,0xc7,0x71,0x70,0x00,0x00, 0x00,0xe0,0x9f,0x83,0x73,0x70,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, //YY7 0x0