广东省韶关市2016高考英语二轮复习 阅读理解练习（4）.docVIP

2016广东韶关市高考英语二轮阅读理解练习（4） 阅读下列短文，从每题所给的四个选项（A、B、C和D）中，选出最佳选项。 【2014模拟】阅读理解 Directions: Read the following three passages. Each passage is followed by several questions or unfinished statements. For each of them there are four choices marked A, B, C and D. Choose the one that fits best according to the information given in the passage you have just read.。 Dibea Smart Vacuum Cleaner(真空吸尘器) X500 Product Operating Battery storage and charging 1. Place the charging home base Note: Put the charging home base against the wall and remove obstacles around it. 2. Charge the robot in either way as shown below: A. Plug into an outlet(插座); B. Press the HOME button on the main body or on the remote control to make the robot return to the charging home base to charge itself. Note: A. Turn on the power switch at the bottom side before charging the robot. B. When the robot is charging, the display panel(仪表板) will show 1111, and repeat from the right to the left. C. When charging is finished, the display panel will show FULL. D. When the robot is charging, do not make the robot start working. 3. Auto charging The robot will automatically return to the charging home base when cleaning is done or the battery is low. Note: Please keep the charging home base plugged in. If not, the robot is unable to auto charge. Starting up/Pause/Sleeping 1. Starting up A. Make sure the power switch is on; B. Press the CLEAN button on the main body or on the remote control to start cleaning. Note: If the robot is in the sleeping mode, press the CLEAN button to wake the robot up from the sleeping mode. Then press CLEAN for a second time, the robot starts cleaning automatically. 2. Pause To turn the robot from the cleaning mode to a selected mode: A. Press either button among PLAN, SPOT, CLEAN and HOME buttons on the main body; B. Press the CLEAN button on the remote control. Note: When the robot is paused, press CLEAN to make the robot restart cleaning. 3. Sleeping T