毕业设计论文--1000MW汽轮发电机定子线棒端部防晕技术的研究推荐.docxVIP

哈尔滨工业大学工学硕士学位论文 - PAGE II - 1000MW汽轮发电机定子线棒端部防晕技术的研究 摘 要 当今社会已完全进入电气时代，用电量也越来越大，为了提高发电量和电机的经济型，对大容量机组要求也越来越高，但是增加电机容量对电机的核心技——线棒的绝缘技术要求就增大，尤其是定子线棒端部的防晕技术。 对大型发电机端部电场分布十分不均匀，极易在定子槽部或端部发生局部放电或产生电晕现象，使绝缘表面受到严重侵蚀，进而影响电机的运行寿命。本文通过介绍1000MW气轮发电机定子结构与端部电场分布的研究，选择非线性半导体SiC的混合物作为电机端部的防晕材料。通过对SiC粉料中加入碳黑制成的防晕涂层，使定子线棒绝缘性能、防晕效果得到较大的提高，尤其是定子线棒优异的电性能，保证了1000MW气轮发电机定子绕组的运行寿命。 关键词　气轮发电机；防晕结构；半导体防晕层 1000MW turbogenerator stator bar end anticorona structure research Abstract Todays society has fully entered the age of electricity, electricity demand is also growing, in order to improve the power generation and the motor for large capacity unit economy, there are increasingly high requirements, but with increased motor capacity on motor core technology -- bar insulation technology requirements will increase, especially stator bar end anticorona technology. For large generator end electric field distribution is very uneven, easily in stator slot or the end of partial discharges occur or corona phenomenon, so that the insulating surface was severely eroded, thereby affecting the operation of the motor service life. This paper introduces the1000MW gas turbine generator stator structure and the end of the electric field distribution of research, selection of nonlinear semiconductor material SiC mixture as the motor end of anti-corona material. Based on the SiC powder adding carbon black made of corona proof coating, so that the stator bar insulation performance, corona proof effect is greatly improved, especially the stator bar and excellent electrical performance, ensuring the 1000MW gas turbine generator stator winding operation life. Key words　 gas turbine generator; anti—corona structure ; semiconductor corona-prevention layer PAGE II - - 目 录 摘要 = 1 \* ROMAN I Abstract = 2 \* ROMAN II TOC \o 1-3 \h \z \u HYPERLINK \l _Toc328499748 第1章 绪论 PAGEREF _Toc328499748 \h 3 HYPERLINK \l _Toc328499749 1.1 课题背景及来源 PAGEREF _Toc328499749 \h 3 HYPERLINK \l _Toc328499750 1.2 课题研究的目