液体滴落的检测与计数37.docVIP

第四届“恒拓.三龙”杯 电子电路设计大赛 作品名称： 液体滴落检测与计数 作 者： 孙加速、郑强强、张恩东 指导教师： 任宏伟 联系电话： 2012年5月1日 目录 摘要………………………………………………………………………………2 1.设计任务与要求……………………………………………………………………3 1.1设计任务…………………………………………………………………… 4 1.2技术指标…………………………………………………………………… 4 1.3题目分析…………………………………………………………………… 4 2.方案比较与论证 …………………………………………………………………4 2.1控制器模块方案论证……………………………………………………… 4 2.2 电机模块方案……………………………………………………………… 5 2.3调速模块…………………………………………………………………… 5 2.4红外对管计数模块………………………………………………………… 5 2.5系统显示模块 …………………………………………………………… 6 2.6、键盘方案模块…………………………………………………………… 6 系统硬件设计:…………………………………………………………………… 4 3.1 系统总体设计:…………………………………………………………… 4 3.2单元电路的设计分单元电路的功能以及工作原理的分析 3.4单元电路的功能以及工作原理的分析. 关键字： MSP430F149 红外对管 步进电机 TFT彩屏 远程监控 Abstract : The system USES the MSP430F149 microcontroller as the main control chip, through to the infrared of liquid precise count to 430 and in the system of the timer reasonable, to achieve the liquid drop speed. Show part adopts 16 colors TFT colour s creens. Liquid drop and detection system and workers of interaction between labeled by independent keyboard realization, operators can through the independent set speed and number drops keyboard. Application step motor suspension liquid for closed loop motion control, the intravenous drip speed closed-loop tracking, achieve system to automatically adjust the speed of a bit.. Low level warning the realization of the function of infrared produced by to the falling edge trigger interrupt have a warning signal, a buzzer and color display alarming signal alarm. Through the 232 communications will alarm signals sent to the nurse station, so as to realize the remote monitoring device. Keywords: MSP430F149 Red out side to the tube Stepping motor RMON TFT color screen 1设计任务 对医用吊瓶注射装置，检测液体滴落速度和数量。滴落速度范围为