镁质耐火材料特性及生产工艺【毕业论文，绝对精品】.docx

摘 要本文介绍了镁质耐火材料特性及生产工艺特点。根据已知的产品品种、工厂规模、设计参数、和生产工艺，制定了工艺流程，并进行了物料平衡计算，确定原料、结合剂的种类和各个工段的含量。依据已算得的各个工段原料的含量、制品的要求、各生产车间的工艺制度等，对各工段主机设备选型进行了计算，并依靠所得数据选择了主机和辅助生产设备；对原料仓库进行了工艺计算，通过设计各原料料堆堆放方式，确定了仓库总长。根据已选设备，严格依照车间工艺布置的原则，对原料仓库、破粉碎车间、成型车间、干燥车间、烧成车间和成品库进行了工艺布置。在设计中力求做到方案科学可行，技术经济合理，并不断对方案优化。在以上工作的基础上，绘制了年产23000吨镁质耐火材料厂总平面布置图、车间平面布置图及相应的纵横剖面布置图共计10张。关键词：镁质耐火材料，耐火材料厂，工艺设计，设备选择AbstractThis paper introduces the refractory characteristics of magnesia and production process characteristics.According to the known varieties of products, factory size, design parameters, and the production process, developed a process, and the material balance calculations to determine raw materials, the combination of various types and the content of Section. Have been calculated based on raw materials in various Section, the requirements of products, production workshop of the system, the Section on a host equipment selection, and choose to rely on data from the mainframe and auxiliary equipment; raw materials warehouse on a Technology, through the design of the material piles of raw materials release, identifying the warehouse chief. According to the election equipment, strictly in accordance with the layout of the workshop principle, the raw material warehouse, breaking smash the workshops, molding workshop, drying workshop, workshop and Cheng Pinku firing of a layout. In the design of scientific programmes to be feasible, technical and economic reasonable, and we will continue to optimize the programme. In the above, on the basis of the drawing with an annual output of 23,000 tons of Magnesia refractory plant refractories general layout plans, workshop layout plan and the corresponding section of the vertical and horizontal layout of a total of 10.Key Words: Magnesia refractory, refractories plant, process design, equipment selection目 录1 绪 论11.1耐火材料简介11.2耐火材料发展情况12 设计原始资料及参数32.1设计题目32.2设计原始资料32.2.1产品方案32.2.2原料配比32.2.3设计参数32.3建厂地点32.4设计参数32.4.1工作制度32.4.2物料平衡计算参数42.5主要原料和动力来源52.6设计的要求和原则53 生产方法和工