采矿工程毕业设计--许厂煤矿1.2 Mta新井设计推荐.docVIP

本科生毕业论文 论文题目： 许厂煤矿1.2 Mt/a新井设计  摘 要 本设计包括三部分：一般部分、专题部分和翻译部分。 一般部分为淄博矿务局许厂煤矿1.2 Mt/a新井设计，共分十章：矿井概述及井田地质特征，井田境界和储量，矿井工作制度、设计生产能力及服务年限，井田开拓，准备方式—带区巷道布置，采煤方法，井下运输，矿井提升，矿井通风及矿井基本技术经济指标。 许厂矿区距济宁市8 km，矿区对外交通便利。区内地势较为平坦，井田走向长度5.8 km，倾斜方向长3.6 km。面积为20.88 km2。井田主采煤层为3下煤层，厚度平均为3 m。煤层倾角平均为4°，属于近水平煤层。 井田工业储量为，矿井可采储量。矿井服务年限为，矿井正常涌水量为，最大涌水量为。为瓦斯矿井。 专题部分题目是建筑物下条带开采技术研究。论文对条带开采的技术研究进行了综述，分析了条带参数设计的优化方法，地表移动参数的影响因素，提出了条带开采地表移动预计参数的新的计算公式。并对现场应用情况进行了效果分析。 翻译部分对综放沿空掘巷卸压技术进行了介绍，其英文题目为Study on destressing technology for a roadway driven along goaf in a fully mechanized top-coal caving face。 关键词：立井；区；；架线电机车运输；中央并列  Abstract This design contains three parts:the general part,the special part and the translated part. The general part is a new design of Xu Chang mine belonging to Zi Bo mining bureau whose production capacity is 1.2 Mt per year.It has ten chapters as follows:the outline of mine and mine field geology, boundary and reserves, working system and productive capacity and service life, development method of the mine, the main roadways, coal mining method and layout or roadways in working area,transportation of underground, mine lifting, mine ventilation and safety, main technique—economic induces. The Xu Chang mine filed lies in the north of Ji Ning about 8 kilometers.The transportation is convenient and.It covers 20.88 square kilometers. The boundary of the minefield run 5.8 kilometers on the strike and the pitch length is 3.6 kilometers.The three is the main coal seam,its dip angle is 4 degree and thickness is about 3m on average. The proved reserves of the minefield are 90.6 million tons,and the recoverable reserves are 77.7335 million tons. The designed productive capacity is 1.2 million tons percent year, and the service life of the mine is 49.8 years. The normal flow of the mine is 200m3 percent hour and the max flow of the mine is 360m3 percent hour. The mineral well gas gushes is lower, It is a low gas mineral well. The working system is “three-eig