基于蓝牙的无线数据采集系统设计.docVIP

编号2017138206 本科生毕业 基于蓝牙的无线数据采集系统设计 Design of wireless data acquisition system based on Bluetooth 学 生 姓 名 专 业 电子信息科学与技术 学 号 1738206 指 导 教 师 分 院 电子工程分院 2017年06月 摘 要 本旨在利用蓝牙技术进行数据采集，设计一个基于蓝牙的无线数据采集系统，实现了蓝牙无线数据采集和传输。基于蓝牙的无线数据采集系统由和两部分组成。其中主要由温度传感器、蓝牙主模块和STM32单片机组成，主要完成数据的采集处理及发送等功能；由TFT彩色液晶显示器、蓝牙从模块和STM32单片机组成，主要完成数据的接收、显示和存储等功能，并向发送命令。该系统主要实现现场高精度、高速度实时数据采集，利用蓝牙的数据透传模式实现数据的无线传输。本系统中STM32单片机是系统的核心部分，通过串口发送动作指令控制前端温度传感器模块进行数据采集，同时将采集到的数据经处理，由蓝牙模块将数据传输给，由完成后续的相应处理工作并将温度在彩晶上显示。经过最终验证本设计达到设计目的。 关键词：数据采集 蓝牙 ST 温度传感器 TFT彩晶 ABSTRACT The purpose of this design is to use Bluetooth technology to collect data and design a wireless data acquisition system based on Bluetooth. The wireless data acquisition system based on Bluetooth is composed of two parts: acquisition system and control system. The acquisition system is composed of temperature sensor, Bluetooth module and STM32 single chip microcomputer, mainly to complete data acquisition, processing and transmission functions; the control system consists of a TFT color LCD display, Bluetooth module and STM32 single chip microcomputer, mainly completes the data receiving, display and storage functions, and send commands to the acquisition system. The system mainly realizes the real-time data acquisition with high precision and high speed, and realizes the wireless transmission of data using the Bluetooth data transmission mode. In this system, STM32 microcontroller is the core part of the system, through the serial port to send commands to control the front temperature sensor module for data collection, and the collected data will be processed by the computer, the Bluetooth module transmits the data to the control system, the corresponding work is completed by the computer after continued, and the temperature displayed on the color crystal. After the final verification of the design can achieve the purpose of design. Keywords: Data acquisition. Bluetooth. STM32. Temperature sensor. TFT color LCD 目