注塑淋浴喷头支架塑料注射模具设计论文.docVIP

注塑-淋浴喷头支架塑料注射模具设计-论文 shower bracket plastic injecting mold design Abstract This article mainly introduced the shower bracket plastic injection mould design, which to refer to a lot of useful information related to the plastic molding and through all kinds of mold design manual, and through the calculation to determine the specific mold die mould manufacturing technology rapid development, has become an important part of modern manufacturing technology. Such as mould CAD/CAM technology, die of laser rapid prototyping technology, molds precision forming technology and die of super precision machining technology. According to the forming process requirement, on the basis of the original plastic its injection molding mold structure is introduced, this paper expounds the key points of die design and working process. Must first from the plastic on the production process to design products for process analysis and calculation, and then on the basis of the analysis and calculation and see the relevant data to determine the molding process, and on this basis into the mold structure design of general assembly drawing. On the basis of the size of the main parts of injection mold design and calculation, phase structure and the size, through continuous calculation and modification, and in guiding the teachers careful care under the guidance and patience to constantly modify repeatedly, finally completed the graduation design independently. Its material is ABS. According to process characteristics and product requirements of the ABS plastic, watches boxes were analyzed with the structure characteristics and molding process. This design using CAD technology to drawing die assembly drawing and part drawing. Has carried on the molding parts to mould the lateral core-pulling mechanism, gating system, and launched demoulding mechanism and cooling system design and analysis. Finally, complete the mold assembly design and main parts graph mapping, to ensure the reliability, rati