毕业设计论文应用于WLANwimax的双频带印刷天线设计.docxVIP

编 号： 审定成绩： 重庆邮电大学毕业设计（论文）设计（论文）题目：应用于WLAN/WiMAX的双频带印刷天线设计学 院 名 称 ：学 生 姓 名 ：专 业 ：班 级 ：0231002学 号 ：指 导 教 师 ：答辩组 负责人 ：填表时间： 年 月重庆邮电大学教务处制摘要在现在无线通信产业的飞速发展下，无线通信行业正遍布我国的各个领域，并且竞争也越来越激烈，而作为移动通信系统中通信终端的天线要求也就越来越高。伴随着无线局域网中各项标准的出台，因此，研制可同时适用于多个频带内的天线成为天线的设计的要求。本文提出了一种应用WLAN/WiMAX通信系统的新型双频带印刷天线。通过在微带板蚀刻对称的叉子形辐射贴片和寄生贴片，仿真设计了一款双频带印刷天线结构，借助于仿真软件对天线进行优化设计，使天线能覆盖2.4/5.2/5.8GHzWLAN和5.5GHz频带，并对其进行了测试。结果表明，测试结果和仿真的结果一样，并且在带内拥有良好的全向辐射特性。论文共分为五个部分。首先,论文简单介绍了无线局域网的基本概念,在了解了无线局域网的的基本知识后讨论了印刷天线发展情况,最后简单叙述了本次用的三维仿真软件。 其次,详细地回顾了天线的基本理论,包括天线的基本电参数,天线单元的馈电方法等等。接着，介绍了WLAN/WiMAX双频带印刷天线的特点和设计特点以及设计要求。然后介绍了应用于WLAN/WiMAX双频带印刷天线仿真的流程的具体步骤。 最后,论文总结了全部工作,并对未来相关研究工作做了适当展望。【关键词】WLAN/WiMAX HFSS双频 对称叉子型ABSTRACTIn the current rapid development of wireless communication industry，wireless communications industry is all over the country in various fields, and more intense competition, as a mobile communication terminal in a communication system, it requires more and more antennas. With the introduction of wireless LAN standards, therefore, development of an antenna can be simultaneously applied to the plurality of band antenna design requirements become. This paper proposes a WLAN / WiMAX applications of new communications system dual-band printed antenna. Microstrip plate etching by fork-shaped symmetrical radiation patch and parasitic patch, simulation designed a dual-band printed antenna structure, by means of simulation software to optimize the design of the antenna, the antenna can cover 2.4/5.2/5.8GHzWLAN and 5.5GHz frequency bands, and tested it. The results showed that the test results and simulation results of the same, and have a good omnidirectional radiation characteristics in the band.The thesis is divided into five parts. First, the paper introduces the basic concepts of wireless LANs, in the understanding of the basics of wireless LAN antenna discussed the development of printing, and finally a brief description of the three-dimensional simulation software used for this. Secondly, a detaile