电子式互感器数据采集器的分析-电气工程专业论文.pdf.docxVIP

AbstractTransformer is an important equipment of the electric power system used to measure current, voltage, and its measurement precision and reliability are closely related to the safe, reliable and economic operation of the power system. As power system voltage levels’s constantly improving and with the aspects of electric power system automation developing and the intelligent requirement unceasing enhancement, there is less and less covering for the disadvantage of traditional electromagnetic power transformer, so researchers are paying mor and more attention to the new electronic current transformer based on optoelectronic technology. In order to meet the need of the development of the electric power system, the study of new type of electronic transformer becomes the hot spot in the research.With the promulgation and implementation of the IEC 61850 standard system, we have had clear and accurate standards and guidelines with the construction, testing and output interfaces of electronic transformer. It promoted the development of the electronic transformer and further research.Firstly, in this paper ,we had do some simple introduction with the concept of electronic transformer, the principle and structure, the research background and its domestic and international development status. Secondly, in this paper the main research content is introduced in detail step by step. Finally, summarized the work in this paper and look forward the work in the future.Based on the prototype electronic voltage/current transformers has been successfully developed in the laboratory, in this paper, according to the national standard of electronic voltage transformer and electronic current transformer is required to complete the realization of the function of the electronic instrument transformer’s data acquisition. Main content includes two aspects; they are just the design of hardware section and software section.The design of Hardware circuit mainly includes voltage-follower, sign