samcef 转子动力学-8.pdf

SAMCEF For ROTORS Chapter 3.3: Stator modeling This document is the property of SAMTECH S.A. MEF 101-03-3-A, Page 1 Table of contents Chapter 3.3: Stator modeling Introduction Super-elements  Parts and import of super-elements This document is the property of SAMTECH S.A. MEF 101-03-3-A, Page 2 Introduction Chapter 3.3: Stator modeling Introduction: I. Introduction II. Super-elements ●Stator modeling is classical and the whole finite element library can be used to III. Parts and import of super- describe no rotating parts from single equivalent springs to complete 3D models. With elements respect to rotor dynamics, damping can also be introduced in the static parts. ●On the other hand, when the size of the model is large, it is interesting to use super- elements to describe the stator dynamics. When dealing with complex structures and in order to facilitate the understanding of the results of the reduced model, it is better to divide stators into several super-elements. This document is the property of SAMTECH S.A. MEF 101-03-3-A, Page 3 Super-elements Chapter 3.3: Stator modeling Introduction : I. Introduction The reduction process is still based on Craig and II. Super-elements Bampton technique. It is necessary to define the III. Parts and import of