天津市五号院高层混合结构施工分析及现场监测-建筑与土木工程专业论文.docx

优秀毕业论文 精品参考文献资料 ABSTRACT With the progress of technology, the rapid development of economy and the reducing of the available land resources, the building structure is developing towards high-rise and super high-rise buildings, and the application of steel and concrete mixed structure form in the high-rise buildings is increasing. In this kind of structure, with the increase of building height, the structure of the vertical deformation difference will arise, which cause the emergence of a series of safety problems. Therefore, it is necessary to carry out construction simulation analysis and the security monitoring of the construction process on this kind of complex structure, to ensure the safety of structure in the construction and use. This article takes the example of tianjin Wuhaoyuan of high-level mixed structure to have simulation analysis of the construction process and monitoring the construction site, as well as comparing and analyzing the characteristics of the changes, so as to draw relevant conclusions. The established MIDAS finite element model of Wuhaoyuan building in Tianjin has been analyzed, having a simulation analysis of the construction process on the assumptions about the model boundary condition. It mainly analyzes the characteristics that the vertical deformation difference of the structure has in vertical and plane, strengthens the time research of the layer waist truss welding, and analyzes that with the increase of the construction height, the changes of the middle of the reinforcement components such as truss, layer, column and beam, etc. According to the result of construction simulation analysis, designs the construction monitoring scheme, which includes the selection of monitoring parts and components, the monitoring of the vertical deformation and the stress, and the use of the surface type vibration sensor which has a good stability. Then will contact the simulation analysis and the construction monitoring activities and discussion,