楔形宽薄腹工形截面压弯构件的平面内稳定性分析-结构工程专业论文.docx

III目录第一章绪论..................…….......…….........….......….......…......................................…·…11.1轻型门式刚架结构及其发展概况..........….......…. ....….................................11.1.1轻型门式刚架的结构特点和结构形式........….................….......….......11.1.2 轻型门式刚架的受力特点........….......................................…...............31.1.3 一阶弹性理论和二阶弹性理论.......…...............…................................31.2 相关屈曲理论及其方法…...............................................................................41.2.1国外的理论研究现状及水平...............….......….......…….........…...........41.2.2国内的理论研究现状及水平....……......................................................51.2.3 相关屈曲理论及其分析方法.........….......……...............….....................61.3 研究内容和采用的措施..........….......….......…...........…........….......……...........7第二童非线性高限元理论..........................................................................................82.1引言……………………………………………………........…........……… .........................82.2非线性有限元方程的解法.............................................................…..............82.2.1直接求解法.....……………………………………………………................….......82.2.2增量法..................................................................................................92.2.3迭代法............…………..........................................................................102.2.4弧长法…..............….......…......................…......….......…..…......…......102.3.收敛准则......................第三章有限元模型的建立........................................................................................123.1 引言................................................................................................................123.2 通用有限元程序ANSYS简介123.3棋形宽薄腹工形截面压弯构件有限元模型的建立....................................133.3.1 有限单元类型..................................…........…·….........….......…..........133.3.2 几何模型的建立......................…........................................................143.3.3边界条件及初始局部儿何缺陷的施加........