Microsoft_Mediaroom_微软IPTV平台概述.ppt

* * * * 2 ways to deliver from deserver (uni and multi cast). VOD is always unicast. Unicast traffic is always unicast for VOD and ICC, you can also configure for unicast only for troubleshooting. * The numbered steps that follow describe details of the process. Live TV acquisition subsystems capture and process a live TV service. Backend operators use the TV Services Management tool to create and configure a live TV service. The configuration process defines the capture and process parameters, such as the transport stream source, the aspect ratio, and the bit rate, for the live TV acquisition subsystem. Live TV acquisition subsystems reside in the acquisition group backend. A single deployment has one or more acquisition group backends. An acquisition group backend is deployed nationally, regionally, or locally. For additional information on acquisition group backends, see Logical Deployment Architecture in Installation and Configuration Guide. For additional information on how to configure and publish a live TV service, see Operations Guide. Live TV acquisition subsystems multicast each live TV service on a port with a unique multicast address. Although the multicast address for each live TV service must be unique, ports is reused. Multicast packets are received by both the live TV delivery subsystem and IPTV Edition clients. Multiple branches and numerous clients connects to a single multicast live TV service coming from a live TV acquisition subsystem. Branch operators use the TV Services Management tool to deploy a live TV service from the live TV acquisition subsystem. Each branch deploys a different set of live TV services. If a branch deploys a live TV service as unicast or ICC with Internet Group Management Protocol (ICC with IGMP), the live TV delivery subsystem receives the multicast stream from the live TV acquisition subsystem. If the service is deployed as a multicast, the DServers ignore the service and the clients connect to it directly. Addition