TSP Technical Case Analysis (TSP技术预报案例分析).pptx

TSP technology’s application case(TSP技术应用案例);Case content Case1：Faultage Case (断层案例)Case2：Karst Case (岩溶案例) ; 1. Faultage Case (断层案例);1.1 Project Overview:1.1工程概况：;2）Data acquisition tunnel face mileage: PDK110 +840 Rock :broken Water: Medium 3）Forecast range is between PDK111+840 and PDK111+943. From Figure 1 we can know the rock of range is mainly dolomite and andesitic basalt. Combination of Figures 1 and 2,there is a faultage named Yan Zi-wo ,faultage is located between PDK110 +800and PDK110+880 . 2）本次工作时，掌子面里程为PDK110+840，围岩破碎，含水。 3）本次工作预报范围为PDK111+840～+943，由图1可知此区域岩质主要为白云岩和安山玄武岩。结合图1和图2，其中在PDK110+800～880附近为燕子窝断层区域。 Notes:Fig1- Geological map , Fig2- CSAMT Result 注：图1为地质纵断面图、图2为可控源音频大地电磁勘探成果图; Fig 2 CSAMT 图2 可控源音频大地电磁勘探成果图;1.2 Project Objective: 1.2工程目的： To provide working face front geology and water change information. 提供掌子面前方地质与水量情况变化信息。 1.3Working process ： 1.3工作过程： According to the actual situation，do the acquisition work. 根据工地实际情况，按照标准工作流程，进行原始数据采集工作。 1.4Data Processing： 1.4数据处理： According to the data specific circumstances to deal with corresponding results. 根据数据具体情况，处理得到相应成果。 ;1.5 2D results ：1.5 2维成果： ;We obtained the mainly information between PDK111+850 and PDK111+875 by the 2D results :1) The reflecting interface is more powerful and more concentrative .2) Dynamic Youngs modulus is the lowest .3) Poisson‘s ratio is the highest .由2D成果得到PDK110+850 ～ +875范围附近主要信息：1）反射界面多、强大；2）动弹杨氏模量呈下降趋势且达到最低；3）柏松比呈上升趋势且达到最高；;结合地质与施工资料判断: 1)此范围位于断层的中心区域; 2)隧道内水量可能会变大，产生涌水，坍塌等情况。 实际开挖时，在PDK110+860处掌子面发生涌水、坍塌，这与预???相符。;Brief summary：1)By more information of the working range, We can draw the right conclusions ;2) Good data results, conclusions can be made more precise .;2. Karst Case (岩溶案例) ;2.1 Project Overview:2.1工程概况： 1）New Railway, Yuxi to Mengzi segment. The tunnel length of 3495m. Here is a karst region ,so the tunnel underground karst wa