Nexus 7000 NX-OS：A Guided Tour of a Data Center Class Operating System.pptVIP

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * GOLD Health Monitors Health Monitors can only be configured for “non-disruptive” tests. These health checks run in the background at predetermined time periods. Health Monitors are turned on where applicable by default. Configuration: Verification: n7000(config)# diagnostic monitor interval module 3 test 1 hour 0 min 20 sec 0 Run every 20 min. n7000# show diagnostic content module 3 Module 3: 10 Gbps Ethernet Module Text Omitted Testing Interval ID Name Attributes (hh:mm:ss) ____ __________________________________ ____________ _________________ 1) PortLoopback------------------ *P*N***E**A 00:20:00 2) RewriteEngineLoopback--------- *P*N***E**A 00:10:00 3) ASICRegisterCheck------------- ***N******A 00:01:00 Text Omitted Switchport Analyzer (SPAN) 18 sessions can be configured Only 2 sessions can be active Ethernet, Port-Channels and the Ethernet-CPU Port can be monitored Destination interface can be an Ethernet or a Port-Channel port Multiple sources and destination ports can be specified Destination ports cannot be reused in multiple sessions Only local SPAN sessions are supported today SPAN Session Guidelines: The SPAN feature can be used to mirror traffic from a source to a destination connected to a packet analyzer for detailed application or host troubleshooting analysis. SPAN Configuration n7000(config)# interface eth 2/14 n7000(config-if)# switchport n7000(config-if)# switchport monitor Configure the Destination SPAN Port: Configure the Monitor (SPAN) Session: n7000(config)# monitor session 1 n7000(config-monitor)# description Inbound(rx) SPAN on Eth 2/13 n7000(config-monitor)# source interface eth 2/13 rx n7000(config-monitor)# destinstation interface ethernet 2