毕业设计论文-游轮客房湿度无线采集电路的设计.doc

游轮客房湿度无线采集电路的设计 [摘要] 本文介绍了无线通信技术在湿度采集电路上的应用。在湿度无线采集电路的设计上，本文主要从以下四个模块作出详尽分析，分别是湿度测量模块、无线传输模块、湿度显示模块、超限报警模块。湿度测量模块利用湿敏传感器HS1101和模数转换器芯片ADC0809测量游轮客房湿度，无线传输模块采用短距离无线传输技术（Zigbee技术）向上位机传输数据，湿度显示模块采用LCD显示器显示湿度数据，而简单的声光报警单元作为超限报警模块主要部分。从全文看，本文侧重相关硬件连接和整体仿真调试。 [关键词] 无线通信；湿度测量；超限报警；联合调试  Design of Humidity Wireless Acquisition Circuit in Cruise Room [Abstract] In this paper, it applies wireless communication technology to the circuit of humidity measurement . In the design of wireless measure circuit , it explains the 4 main modules in detail, including humidity measurement module and wireless communication module and humidity display module and transfinite alarm module. Humidity measurement module uses wet sensor named HS1101 and A/D converter called ADC0809 to measure the humidity in cruise room. The humidity data is transported to CPU by the wireless communication technology (Zigbee technology) in wireless communication module . And the data is showed on the LCD in humidity display module .The sound and light alarm is the main part of the transfinite alarm module . As a whole , the paper emphasis on related hardware connection and joint debugging . [Key words] Wireless communication; Humidity measurement ;Transfinite alarm ;Joint debugging  目录 0 引言-------------------------------------------------------------1 1 湿度测量模块-----------------------------------------------------1 1.1 湿度传感器简介---------------------------------------------1 1.2 湿度传感器频率输出回路-------------------------------------1 1.3 模/数转换器简介--------------------------------------------1 1.4 湿度传感器硬件设计-----------------------------------------1 2 无线传输模块-----------------------------------------------------1 2.1 无线传输技术概况-------------------------------------------1 2.2 zigbee技术特点及协议框架----------------------------------1 2.3 硬件设计---------------------------------------------------1 2.4 3 湿度显示模块-----------------------------------------------------1 3.1 LCD芯片简介-------------