毕业设计（论文）-基于RS-485总线的转速表系统.docVIP

摘要 本系统是一个基于RS-485总线的转速表系统。系统的硬件由单片机、键盘和数码管显示模块构成。本设计主要是把变频器回传的数据读取出来,传送给单片机进行处理转换，然后通过数码管显示出来，并可以随着电机转速的变化实时通过数码管显示出来,直观的反映出来,便于读取转速和其他数据. 在工业现场当中,所有的生产设备基本上都是一个信息孤岛,所有的信息只是在设备当中使用没有与外界进行信息交换,自动化程度较低.如果能够使得生产设备进行信息数据相互交换,那么自动化程度将大大提高。Modbus通信协议 Abstract This system is based on the RS485 bus ratemeter system. The system hardware by the Single-Clip Microcomputer, the keyboard and the digital tube demonstrates the module constitution. This design mainly is reading the frequency changer feedback data, Transmits carries on processing to the Single-Clip Microcomputer to transform, then demonstrated through the digital tube, and may real-time demonstrate along with the electrical machinery rotational speed change through the digital tube, Direct-viewing reflection, Is advantageous for reading the rotational speed and other data In the middle of industry scene, All production equipment basically all is an information isolated island, All information only are use in the middle of the equipment have not carried on the exchange of information with the outside, The automaticity is low If can cause the production equipment to carry on the information data to exchange mutually, Then the automaticity greatly will enhance. In the industrial automation control system, is PLC and the transducer serial combination application which is most common, and produced many and varied PLC to control the frequency changer the method, in which uses the RS-485 communication way implementation control the plan to obtain the widespread application: Because its antijamming ability strong, the transmission speed high, the transmitting range far also the construction cost is inexpensive. Key word: RS485 bus Speed instrumentation Modbus correspondence agreement 目录 第1章 绪论···································································································1 1.1设计背景·······················································································1 1.1.1 仪表······