生物转盘浸没式MBR课程设计.docVIP

摘要 生活污水主要是城市生活中使用的各种洗涤剂和污水、垃圾、粪便等，多为无毒的无机盐类，生活污水 中含氮、磷、硫多，致病细菌多。 由于家庭用水，初期雨水、洗涤等用水，使废水中的N,P严重超标，而且COD,BOD的值也在增加，为了减少这些指标的含量，我选取了生物接触氧化池、生物转盘+MBR工艺、生物滤池+氧化沟工艺等3个工艺去计算他们的去除率。这三个工艺都能够去除N、P，但是因为生物接触氧化池的去除率不高，氧化沟操作较繁琐。最后因为是处理的生活污水，N、P含量较高，故我选择了生物转盘+MBR工艺来对污水进行处理A2/O工艺浸没式MBR来对废水中的N,P的去除。在这三个工艺当中，对污水处理都是达标的，而生物转盘+MBR工艺的去除率是最高的可以达到对N、P、BOD、COD、的去除率达到百分之95以上。 关键词：生活污水；MBR工艺；生物转盘 Abstract Sewage is mainly used in all kinds of detergents and city life sewage, trash, waste, etc., are non-toxic inorganic salts, sewage containing nitrogen, phosphorus, sulfur, disease-causing bacteria. Can lead to pathogens and sewage pollution and eutrophication pollution, acid, alkali, salt pollution. Early because of the household water, rain water, washing with water, the waste water of N, P exceeds bid badly, and COD, BOD values are also on the increase, in order to reduce the content of these indicators, I selected the biological contact oxidation pond, biological rotary + MBR technology, biological filter, oxidation ditch technology such as 3 to calculate their removal process. These three process can remove N, P, but because the removal rate of biological contact oxidation pool is not high, oxidation ditch was complicated operation. End because it is a processing of sewage, N, P content is higher, therefore I chose the biological rotating disc + MBR process to deal with the A2 / O sewage immersion of MBR to wastewater N, P removal. Among the three process, is standard for sewage treatment, and the removal rate of biological rotating disc + MBR process is of the highest can reach to the removal rate of N, P, BOD, COD, more than ninety-five percent. Key words: Sewage; The MBR process; Biological rotating disc 目录 第一章 设计概述 1 1.1设计内容及要求 1 1.1.1设计内容 1 1.1.2 设计要求 1 1.2 设计参数 1 1.2.1 设计污水流量 1 1.2.2 设计原则 2 第二章 工艺流程的确定 3 2.1 污水中水质的分析 3 2.2 工艺比选 3 2.2.1 生物接触氧化池工艺 3 2.2.2 生物转盘+MBR工艺 5 2.2.3生物滤池+氧化沟工艺 7 第三章 生物转盘+浸没式MBR设计计算 10 3.1 浸没式MBR设计参数 10 3.2 设计计算 10 第四章 污水处理流程工艺设计 14 4.1 工艺流程设计 14 4.1.