基于fluent的准干式深孔加工系统结构的分析-analysis of structure of quasi-dry deep hole processing system based on fluent.docxVIP

Research Of Near-Dry Deep Hole Machining System Based On FLUENTABSTRACTHole drilling is difficult in machinery manufacturing，deep-hole drilling is difficult in hole drilling，that shows the deep-hole processing technology has many drawbacks. As one of the most expensive processing technology, Many domestic deep-hole processing equipments are imported. However hole processing occupied third of all mechanical processing, thedeep-hole processing occupied more than forty percent of the hole processing. Thus we can see that the deep-hole processing plays an important role in the manufacturing industry. At present, cooling and lubrication difficult, scraps discharge difficult is still the short board of the deep-hole processing technology, ifa breakthrough can made in these aspects, it will bring great convenience to manufacturing.So the research in near-dry is very meaningful.In this paper, the main contents are as following:Eulation chip with FLUENT software in different condition and gain different negative pressure. Traditional wet processing use cutting fluid to produce negative pressure, and near-dry use air.We can see from the simulation , both of them can have a negative effect, and the effect of near-dry is better.Sudy on working mechanism of the atomizer. Atomizers are signs of near-dry processing in contrast to other processing, cutting fluid runoff from the atomizer，then through the capillary into the cutting zone in the form of small droplets cooling, lubricating. Highspeed of atomization accelerate the chip’s breaking and removal. In addition, analysis of the factors of fluencing the negative effect with mechanical knowledge, providing a basis for the design of atomizer.Build the mathematical model of the chip and improve the struct. Based on the mathematical model of knowledge, obtain the factors influencing the effects of negative pressure, provide a theoretical foundation for the improvement of chip. On the basis oftheoretical knowledge, the chip structure