Microchp dsPIC33FJ16系列高性能低成本马达控制方案.docxVIP

Microchip dsPIC33FJ16系列高性能低成本马达控制方案关键字：工业控制,马达控制Microchip 公司的dsPIC33FJ16GP101/102和dsPIC33FJ16MC101/102 是高性能超低成本数字信号控制器（DSC），包含了DSP功能和高性能16位MCU架构,3.0V-3.6V的性能高达16MIPS，可扩展的工作温度-40℃到 +125℃，主要用在家用电器如洗衣机,医疗设备如输液泵，工业如AC马达等.本文介绍dsPIC33FJ16系列主要特性，方框图，CPU核方框图和应用电路以及马达控制板系统框图，电路图和材料清单（BOM）。This document contains device specific information for the dsPIC33FJ16GP101/102 anddsPIC33FJ16MC101/102 Digital Signal Controller(DSC) Devices. The dsPIC33F devices containextensive Digital Signal Processor (DSP) functionality with a high-performance, 16-bit microcontroller (MCU) architecture.dsPIC33FJ16系列主要特性:Operating Range:? Up to 16 MIPS operation (3.0V-3.6V):- Industrial temperature range (-40℃ to +85℃)- Extended temperature range (-40℃ to +125℃)On-Chip Flash and SRAM:? Flash program memory (16 Kbytes)? Data SRAM (1 Kbyte)? Security for program FlashSystem Management:? Flexible clock options:- External, crystal, resonator, internal FRC- Phase-Locked Loop (PLL)? High-accuracy internal FRC- ±0.25% typical? Power-on Reset (POR)? Power-up Timer (PWRT)? Oscillator Start-up Timer (OST)? Brown-out Reset (BOR)? Watchdog Timer with its own RC oscillator? Fail-Safe Clock Monitor (FSCM)Motor Control PWM:? 6-channel 16-bit Motor Control PWM:- Three duty cycle generators- Independent or Complementary mode- Programmable dead time and output polarity- Edge-aligned or center-aligned- Manual output override control- Up to two Fault inputs- Trigger for ADC conversions- PWM frequency for 16-bit resolution (@ 16 MIPS) = 488 Hz for Edge-Aligned mode, 244 Hz for Center-Aligned mode- PWM frequency for 11-bit resolution (@ 16 MIPS) = 15.63 kHz for Edge-Aligned mode, 7.81 kHz for Center-Aligned modePower Management:? Single supply on-chip voltage regulator? Switch between clock sources in real time? Idle, Sleep, and Doze modes with fast wake-upAnalog Peripherals:? 10-bit, 1.1 Msps Analog-to-Digital Converter (ADC):- Two and four simultaneous samples- Up to six input channels with auto-scanning- Conversion star