新源煤矿0.9Mta新井设计-复合顶板下回采巷道支护技术研究.doc

摘 要 本设计包括三个部分：一般部分、专题部分和翻译部分。 一般部分为Mt/a新井设计。共分10章：1矿区概述及井田地质特征；2.井田境界和储量；3.矿井工作制度及设计生产能力、服务年限；4.井田开拓；5.准备巷道布置；6.采煤方法；7.井下运输；8.矿井提升；9.矿井通风与安全技术；10.矿井基本技术经济指标。矿井工业场地位于山西省沁源县西部李元镇附近，距沁源县城约17km行政区划隶属于山西省市管辖。井田南北～km，东西长～km，面积约km2。主采煤层为号煤，号煤平均厚m，井田地质条件简单。矿井工业储量为Mt，可采储量Mt。矿井正常涌水量为m3/h，最大涌水量为m3/h。矿井瓦斯涌出量低，为低瓦斯矿井。 矿井为井开拓，大巷采用胶带输送机运煤，辅助运输采用车，矿井通风方式为中央并列式通风。矿井年工作日为330d，每天净提升时间16h矿井工作制度采用“三八”制，两班生产、一班准备。 专题部分题目是技术研究。 翻译部分主要内容英文题目为：Comprehensive evaluation of water-inrush risk from coal floorsABSTRACT This design includes three parts: the general part, the special subject part and the translated part. The general part is a new design for Xinyuan mine. This design includes ten chapters. 1. An outline of the mine field geology. 2. Boundary and the reserves of mine. 3. The service life and working system of mine. 4. development engineering of coalfield. 5. The layout of panels. 6. The method used in coal mining. 7. Transportation of the underground. 8. The lifting system of the mine. 9. The ventilation and the safety operation of the mine. 10. The basic economic and technical norms. Xinyuan mine is located nearby Liyuan of Changzhi in Shanxi province. The length of the mine field is 4.3～km，the width is about～km，total area is17.88 km 2. The No.2 coal seam is the main coal seam，The thickness of the three main coal is about m respectively. The geologic structure of this coalfield is simple. The normal flow of the mine is 7.5 m3 percent hour and the max flow of the mine is 10.83 m3 percent hour. The mineral gas gushes the deal lower, and it is a low gas mineral mine. The mine is a single level in two shafts to develop. The central laneway uses Belt Conveyor to transit coal, and trolley wagons are used for accessorial transportation in the roadway. The ventilation mode of this mine is center juxtapose form. The “three-eight” working system is used in the Xinyuan mine. It produces for 330 days a year. Special subject part of topics is Analysis and Control About Stability of Compound Ro