毕业设计（论文）奥迪汽车标志注塑模设计与制造.docVIP

毕业设计（论文）--奥迪汽车标志注塑模设计与制造 毕业设计论文报告 题 目 奥迪汽车标志注塑模设计与制造 系 别 中德机电学院 专 业 模具设计与制造 班 级 模具0901班 学生姓名 汤 超 学 号 指导教师 袁小江 2012年 4月 奥迪汽车标志注塑模设计与制造 摘要本文是关于奥迪汽车标志注塑模设计与制造通过对注塑成型的特点产品的要求材料的分析等设计制造出合格的产品本文关于产品设计分为五个章节分别是第二章方案论证第三章确定成型设备第四章注塑模结构设计第五章注塑模设计的尺寸计算第六章注塑机有关参数的校核 对塑件的工艺性分析和塑件的尺寸精度分析从而确定方案论证确定成型设备是通过计算塑件的体积和质量来初选注塑机注塑模结构设计包括分型面的选择型腔数目的确定及型腔的排列浇注系统的设计型腔型芯结构的确定等本文注塑模设计的尺寸计算主要是成型零件尺寸的计算模具闭合高度的确定和校核及模具安装部分的校核是注塑机有关参数的校核 整体的设计是在秉承着满足技术要求的条件下尽可能的以最简单的结构和最少的成本生产出合格耐用的产品 关键词注塑模注塑模设计塑件 Audi car mark injection mold design and manufacturing ABSTRACTThe paper is about the Audi logo design and manufacture of injection mold Its about the design and manufacture qualified products by analysis the characteristics of injection molding product requirements material and so on This paper is divided into five chapters on product design They are the demonstration of the program on chapter two determine the molding equipment on chapter three the structural design of the injection mold on chapter four the calculating of the diameter of the injection mold on chapter five and Check the parameters of injection molding machine on chapter six Determine the program demonstration by analysis the process and the size of the plastic parts Demonstration of the program is the selection of the injection molding machine by calculating the volume and the weight of the plastic parts The structural design of the injection mold contains the choice of parting the number of the cavity to determine the arrangement of the cavity gating system design determining the structure of the cavity and the core etc The paper is committed on the calculation of the molded part dimensions Determination and checking of the mold shut height and checking the installation section of the mold is about the injection molding machine The overall design should be as durable production of qualified products economically and simplyand the condition shoul