在热控设备检修中操作规程初步探析.docVIP

在热控设备检修中操作规程初步探析 　　摘要： 热工仪表及控制装置的检修和调校是为更好的恢复和确认热工仪表及控制装置的性能与质量，热工仪表及控制装置的运行维护原则是确保热工仪表及控制装置状态良好和工作可靠，机组设备完善和可控性良好是热工仪表及控制装置随机组投入运行的重要条件。 　　随机组运行的主要热工仪表及控制装置，随大、小修同时进行检修工作，非主要热工仪表及控制装置的检修周期，一般不应超过两年，对于在运行中可更换而不影响机组安全运行的热工仪表及控制装置，可采用备用仪表及控制装置替换，进行轮换式检修。当由于机组设备问题使热工仪表及控制装置无法工作时，仪表及控制装置不得强行投入运行。不属于联锁保护系统的热工仪表及控制装置在运行中的就地调校，其重点是检查和确认该仪表及控制装置的准确度、稳定度和灵敏度，使其工作在最佳状态。热工仪表及控制装置在启动前的现场调校，其重点是对包括该仪表及控制装置在内的检测和控制系统进行联调，使其综合误差和可靠性符合机组安全经济运行的要求。 　　关键词：热控设备检修、仪表、检修规程 　　Abstract: thermal instrument and control device maintenance and calibration of is to better recovery and confirm instruments and control of the thermal performance and quality device, instrument and thermal control operation of the plant maintenance principle is to ensure that the thermal and instruments and control equipment in good condition and reliable work, the equipment is perfect and controllable good thermal instrument and control device with the unit operation of the important conditions. 　　With the unit operation of the main instruments and control device thermal, with big, minor repairs and maintenance work, the main instruments and thermal control device maintenance cycle, generally should not be more than two years, in the operation of replaceable without affecting the safe operation of the unit control devices and instruments and thermal, can use spare instrumentation and control device replacement, LunHuanShi overhaul. When the equipment problem due to thermal instrument and control device cant work, instrument and control device shall not impose is in operation. Do not belong to interlock protection system of thermal control device in meters and the operation of the on-site adjustment, the emphasis is on the inspection and verification of the instrument and control the accuracy of the device, stability and sensitivity, make its work in the best state. Thermal instrument and control device in the set-up before starting the site, the key point is to include the instrument and control device, the