BS EN 10028-6-2009 压力容器用的扁平钢轧材.淬火和回火可焊细粒钢.doc

BS EN 10028-6-2009 压力容器用的扁平钢轧材.淬火和回火可焊细粒钢 BS EN 10028-6:2009 ICS 77.140.30; 77.140.50 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Flat products made of steels for pressure purposes Part 6: Weldable fine grain steels, quenched and tempered .yang64#ff66ff This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2009. ?? BSI 2009 ISBN 978 0 580 64189 3 Amendments/corrigenda issued since publication Date Comments BS EN 10028-6:2009 National foreword This British Standard is the UK implementation of EN 10028-6:2009. It supersedes BS EN 10028-6:2003 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/73/2, Steel plates and bars for pressure purposes. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. .yang6#ff66ff BS EN 10028-6:2009 EUROPEAN STANDARD NORME EUROP??ENNE EUROP??ISCHE NORM EN 10028-6 June 2009 ICS 77.140.30; 77.140.50 Supersedes EN 10028-6:2003 English Version Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered Produits plats en acier pour appareils à pression - Partie 6: Aciers soudables à grains fins, trempés et revenus Flacherzeugnisse aus Druckbeh??lterst??hlen - Teil 6: Schwei??geeignete Feinkornbaust??hle, vergütet This European Standard was approved by CEN on 14 May 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicatio