注射螺杆特点大全（Features of injection screw）.docVIP

注射螺杆特点大全（Features of injection screw） With the deepening of understanding of polymer compounds, injection screw has made great progress. Because the technical performance of the injection screw is the key to achieve good injection plasticizing performance, it is particularly important for the rational design of the injection screw. This paper analyzes the relationship between the main technical parameters of the injection screw and the main structure and technical performance, is proposed to determine the main technical parameters of injection screw principle, combined with the authors actual design, analysis and research are carried out more specific from two aspects of theory and practice. Screw length diameter ratio The screw length to diameter ratio is a very important parameter of the screw, and it is especially important for the common screw. The ratio of length to diameter of universal screw is increased from 13~14 to 18, which has been increased to 20~22, or even 26. 1, screw length diameter ratio and injection stroke Injection stroke expresses the amount of injection, and it is an important technical parameter. In the process of injection, the amount of material filled by screw is a very uncertain factor. When the injection, the screw axial forward, the material into the screw groove, but not full of screw groove, because the injection time is insufficient to meet the time required to completely fill the screw groove. The air is easy to be inhaled due to the sparse material filling, and if the air can not be discharged in time, the plasticizing quality will be reduced. Generally, the metering stroke size is the main factor determining whether air can enter the storage cylinder. The study of various materials shows that if the metering stroke is greater than 3D, the gas entrainment will occur at the back of the ring. If the screw diameter is less than 18 (screw metering stroke 3D meet the ratio of length to diameter), which began to melt the solid feeding se