培训资料数字乳腺三维摄影技术.pptVIP

* MQSA Safety Limit is 3mGy * FDA 乳腺摄影质量控制标准发案（MQSA）要平均腺体剂量不能超过3mGy（使用ACR标准模体，压迫厚度为4.2cm，自动曝光条件下）。 2D和3D两种方式剂量高于单独使用2D，但是总的剂量仍在MQSA的要求范围之内。 www,378700000.com * 功能全面的图像阅览工作站 支持3D, 2D, 2D+3D, 以及 tomo 单次投照图像的阅览 ◆断层和电影模式阅览，以及 slabbing view 模式 ◆ COMBO模式下的2D + 3D图像阅览 强大的数字乳腺三维断层影像阅览平台! * 顺畅和自然的在不同形式的图像模式间转换 简单操作即可实现断层、电影和2D/3D toggle模式转换 高级的阅览工具可以帮助详尽的解析断层影像 * DBT相比FFDM在提高乳腺癌的检出率、降低误诊率方面有很大的应用价值，对筛查早期乳腺癌也有很大潜能。 近年报道的对比强化DBT(CE—DBT)检查．可进一步提高病灶检出率，尤其浸润性病灶。不仅可以更清楚地显示其形态，还可提供病灶的血供信息。 www,378700000.com * * * * * * In combo-mode, 15 tomosynthesis projection images are acquired first within 4 seconds Following tomo acquisition, the HTC grid automatically engages and a conventional 2D image is acquired under the same compression 2D and tomo images are perfectly co-registered because they are acquired in the same compression geometry Total acquisition time/image is 10-12 seconds * In this tomo image, the spiculations are very clearly defined, eliminating the need for additional images. * In this example, one region of interest was visible on the 2D exam, but the tomo exam revealed an additional adjacent lesion. * In the 2D image, the borders of the cyst are poorly defined, whereas as the tomo slice clearly delineates the borders, greatly facilitating margin analysis. * * In the tomo slice, microcalcifications associated with a mass are clearly defined, but probably would have been missed by the reviewer in the 2D image. * * Example of false positive for mammography, resolved by tomosynthesis. The object circled on the mammogram was highly suspicious for malignancy. The structure was seen in both the MLO and CC views, and persisted on the multiple diagnostic mammograms. The patient underwent biopsy and the structure was benign. If you look at the corresponding tomosynthesis images in the area, you see nothing malignant. The structure seen in the mammogram was the result of overlapping tissues. Diagnosis was given as superimposed parenchyma. This i